师资

EN       返回上一级       师资搜索
余同希
访问教授
metxyu@ust.hk

工作经历

◆ 1968/9 – 1970/3, 广东台山 农场 劳动锻炼
◆ 1970/4 – 1977/12, 四川泸州 长江挖掘机厂 技术员
◆ 1978/1 – 1979/12, 天津工程机械研究所 工程师
◆ 1980/1 – 1981/12, 英国剑桥大学 工程系 访问学者
◆ 1983/8 – 1983/11, 英国剑桥大学 工程系 Research Associate
◆ 1983/12 – 1984/3, 美国布朗大学 工程系 Research Associate
◆ 1984/3 – 1991/12, 北京大学 力学系 教授、博导、固体力学教研室主任
其中 1988 及1991 各有8个月在英国剑桥大学工程系作访问学者
◆ 1992/1 – 1995/3,英国曼彻斯特理工大学(UMIST) 机械工程系 教授(Reader)
◆ 1995/4 – 2010/6,香港科技大学机械工程系 教授、讲座教授
◆ 2011/1 – 2011/5,2012/1– 2012/5,新加坡南洋理工大学机械工程学院 访问教授
◆ 2012/6 – 现在,香港科技大学校长或副校长(研究)的资深顾问(Part time)

 

学习经历

◆ 1958-1964, 北京大学 数学力学系 本科
◆ 1964-1968, 北京大学 数学力学系 研究生
◆ 1981-1983, 英国剑桥大学 工程系 博士

 

所获荣誉

◆ 1988 – 现在,英国剑桥大学 丘吉尔学院Overseas Fellow
◆ 1995,英国剑桥大学 Doctor of Science (荣誉)
◆ 2000 – 现在,Member of Steering Committee, Asia-Pacific Engineering Plasticity (AEPA)
◆ 2001,中国高校科学技术奖一等奖
◆ 2003 – 现在,美国机械工程学会(ASME) Fellow
◆ 2003 – 现在,英国机械工程师学会(IMechE) Fellow
◆ 2016 – 现在,Honorary member, International Society of Impact Engineering

 

代表著作

  •  余同希、邱信明,冲击动力学,清华大学出版社,北京,2011年。

  • T.X. Yu and XinMing Qiu, Introduction to Impact Dynamics, Tsinghua University Press and Wiley, 2018.

  •  余同希、薛璞,工程塑性力学,高等教育出版社,北京,2010年。

  •  G. Lu and T.X. YuEnergy Absorption of Structures and Materials, Woodhead Publishing Limited, Cambridge, UK, 2003.

  • 余同希、卢国兴,材料与结构的能量吸收,化学工业出版社,北京,2006年。

  •  W.J. Stronge and T.X. YuDynamic Models for Structural Plasticity, Springer-Verlag, London, 1993.

  • 余同希、W.J. 斯壮, 结构塑性的动力模型,北京大学出版社,北京,2002年。

  •  余同希、章亮炽,塑性弯曲理论及其应用 ,科学出版社,北京,1992年。

  • T.X. Yu and L.C. Zhang, Plastic Bending: Theory and Applications, World Scientific,  Singapore, 1996.

 

代表文章

  • Xueyu Bai, Ling Zhu and T.X. Yu, Saturated impulse for fully clamped square plates under blast loading, Int. J. Mech. Sci146-147, 417-431, 2018.

  •  Y. Wang, Y.L. Yang, S. Wang, Z.L. Huang and T.X. Yu, Dynamic behavior of circular ring impinging on ideal elastic wall: Analytical model and experimental validation, Int. J. Impact Engng. 122, 148-160, 2018.

  • YuZhe Liu, XinMing Qiu and T.X. Yu A theoretical model of the inversion tube over a conical die, Thin-Walled Structures127, 31-39, 2018.

  • YuZhe Liu, XinMing Qiu, HongLei Ma, WenWen Fu and T.X. Yu, A study of woodpecker's pecking process and the impact response of its brain, Int. J. Impact Engng. 108, 263-271, 2017.

  • Dora Karagiozova, T.X. Yu, Shiyun Shi, Ling Zhu, On the influence of elasticity on the large deflections response of circular plates to uniform quasi-static pressure, Int. J. Mech. Sci131-132, 894-907, 2017.

  •  Pengfei Wang, Xin Zhang, Reinack Varghese Hansen, Gengzhi Sun, He Zhang, Lianxi Zheng, T.X. Yu, Guoxing Lu, and Jinglei Yang, Strengthening and failure mechanisms of individual carbon nanotube fibers under dynamic tensile loading, Carbon102, 18-31, 2016.

  •  X.H. Yu, X.M. Qiu and T.X. Yu, Theoretical model of a metal tube under inversion over circular dies, Int. J. Mech. Sci108-109, 23–28, 2016.

  •  L.L. Hu, Zh.H. Zeng and T.X. Yu, Axial crushing of pressurized thin-walled cylindrical tubes -- analysis and simulations, Int. J. Mech. Sci107, 126–135, 2016.

  •  Yanfei Xiang, T.X. Yu and Liming Yang, Comparative analysis of energy absorption capacity of polygonal tubes, multi-cell tubes and honeycombs by utilizing Key Performance Indicators, Materials & Design89, 689-696, 2016.

  •  郑宇轩, 周风华, 余同希, 动态碎裂过程中的最快速卸载现象,“中国科学:技术科学”,第46卷,第1期,1-7页,2016年。

  •  H.H. Ruan and T.X. Yu, The unexpectedly small coefficient of restitution of a two-degree-of-freedom mass-spring system and its implications, Int. J. Impact Engng88, 1-11, 2016.

  •  S. Xu, D. Ruan, G. Lu and T.X. Yu, Collision and rebounding of circular rings on rigid target, Int. J. Impact Engng79, 14-21, 2015.

  • R.H. Bao and T.X. Yu, Collision and rebound of ping pong balls on a rigid target, Materials & Design87, 278-286, 2015.

  •  R.H. Bao and T.X. Yu, Impact of an elastic-plastic ring on a rigid wall, Int. J. Mech. Sci91, 55-63, 2015.

  •  D. Karagiozova, T.X. Yu, G. Lu and X. Xiang, Response of a circular metallic hollow beam to an impulsive loading, Thin-Walled Structures80, 80-90, 2014.

  •  M. Xu, Y. Wang, X.L. Jin, Z.L. Huang and T. X. Yu, Incorporating dissipated impact into random vibration analyses through the modified Hertzian contact model, ASCE Journal of Engineering Mechanics139(12), 1736-1743, 2013.

  •  L.L. Hu and T.X. Yu, Mechanical behavior of hexagonal honeycombs under low-velocity crushing – theory and simulations, Int. J. Solids Struct. 50, 3152-3165, 2013.

  •  D. Karagiozova, T.X. Yu and G. Lu, Transverse blast loading of hollow beams with square cross sections, Thin-Walled Structures62, 169–178, 2013.

  •  C.J. Shen, T.X. Yu and G. Lu, Double shock mode in graded cellular rod under impact, Int. J. Solids Struct. 50, 217–233, 2013.

  •  Fenghua Zhou, T.X. Yu and Liming Yang, Elastic behavior of ring-on-foundation, Int. J. Mech. Sci. 54(1), 38-47, 2012.

  •  Q.M. Qiu and T.X. Yu, Some topics in recent advances and applications of structural impact dynamics, Applied Mechanics Review64(3), 034001, DOI: 10.1115/1.4005571, May 2011.

  • Xinghua Zhang, Ping Feng, Yongjun He, T.X. Yu, Qingping Sun, Experimental study on rate dependence of macroscopic domain and stress hysteresis in NiTi shape memory alloy strips, Int. J. Mech. Sci.52(12), 1660-1670, 2010.

  •  L.L. Hu and T.X. Yu, Dynamic crushing strength of hexagonal honeycombs, Int. J. Impact Engng37(5), 467-474, 2010.

  •  P. Xue, C.F. Qiao and T.X. Yu, Crashworthiness study of a keel beam structure, Int. J. Mech. Sci. 52(5), 672-692, 2010.

  • C.Y. Zhou and T.X. Yu, Analytical models for shock isolation of typical components in portable electronics, Int. J. Impact Engng36(12), 1377-1384, 2009.

  •  X.M. Qiu, J. Zhang and T.X. Yu, Collapse strength of periodic planar lattices under uniaxial compression, Part I: Quasi-static strength predicted by limit analysis, Int. J. Impact Engng36(10-11), 1223-1230, 2009.

  •  X.W. Zhang, H. Su and T.XYu, Energy absorption of an axially crushed square tube with a buckling initiator, Int. J. Impact Engng. 36(3), 402-417, 2009.

  •  X.W. Zhang and T.X. Yu, Energy absorption of pressurized thin-walled circular tubes under axial crushing, Int. J. Mech. Sci.51(5), 335-349, 2009.

  •  L.L. Hu, T.X. Yu, Z.Y. Gao and X.Q. Huang, The inhomogeneous deformation of polycarbonate circular honeycombs under in-plane compression, Int. J. Mech. Sci. 50(7), 1224-1236, 2008.

  •  Z.Y. Gao, T.X. Yu and H. Zhao, Mechanical behavior of metallic hollow sphere (MHS) materials: An experimental study, ASCE J. Aerospace Eng. 21(4), 206-216, 2008.

  •  J. Cao, R. Akkerman, P. Boisse, J. Chen, H.S. Cheng, E.F. de Graaf, J.L. Gorczyca, P. Harrison, G. Hivet, J. Launay, W. Lee, L. Liu, S.V. Lomov, A. Long, E. de Luycker, F. Morestin, J. Padvoiskis, X.Q. Peng, J. Sherwood, Tz. Stoilova, X.M. Tao, I. Verpoest, A. Willems, J. Wiggers, T.X. Yu and B. Zhu, Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results, Composites Part A – Applied Science and Manufacturing39(6), 1037-1053, 2008.

  •  C.Y. Zhou, T.X. Yu and R.S.W. Lee, Drop/impact tests and analysis of typical portable electronic devices, Int. J. Mech. Sci. 50(5), 905-917, 2008.

  •  D. Karagiozova, T.X. Yu and Z.Y. Gao, Stress-strain relationship for metal hollow sphere materials as a function of their relative density, ASME J. Appl. Mech., 74(5), 898-907, 2007.

  •  B. Zhu, T.X. Yu and X.M. Tao, Large deformation and slippage mechanism of plain woven composite in bias extension, Composites Part A – Applied Science and Manufacturing38(8), 1821-1828, 2007.

  •  B. Zhu, T.X. Yu and X.M. Tao, An experimental study of in-plane large shear deformation of woven fabric composite, Composite Science and Technology67(2), 252-261, 2006.

  • S.L. Ruan, P. Gao and T.X. Yu, Ultra-strong gel-spun UHMMPE fibers reinforced using multiwalled carbon nanotubes, Polymer47(5), 1604-1611, 2006.

  •  D. Karagiozova, T.X. Yu and Z.Y. Gao, Modeling of MHS cellular solid in large strains, Int. J. Mech. Sci. 48(11), 1273-1286, 2006.

  •  D. Karagiozova and T.X. Yu, Post-collapse characteristics of ductile circular honeycombs under in-plane compression, Int. J. Mech. Sci. 47(4-5), 570-602, 2005.

  •  Zarudi, L.C. Zhang, W.C.D. Cheong and T.X. Yu, The difference of phase distributions in silicon after indentation with Berkovich and spherical indenters, Acta Materialia53, 4795-4800, 2005.

  •  C.Z. Zhu, W. Guo, T.X. Yu, C.H. Woo, Radial compression of carbon nanotubes: Deformation and damage, super elasticity and super hardness, Nanotechnology16, 1035-1039, 2005.

  •  Qing Zhou and T.X. Yu, Use High-efficiency energy absorbing device to arrest progressive collapse of tall building, ASCE Journal of Engineering Mechanics130(10), 1177-1187, 2004.

  •  Wanlin Guo, C.Z. Zhu, T.X. Yu, C.H. Woo, B. Zhang and Y.T. Dai, The formation of sp3 bonding in nano-indented carbon nanotubes and graphite, Physics Review Letters93(24), 245502 (week ending 10 December 2004), 2004.

  •  Linmao Qian, Xudong Xiao, Qingping Sun and T.X. Yu, Anomalous hardness and wear properties of a superelastic nickel-titanium alloy, Applied Physics Letter84(7), 1076-1078, 2004.

  •  S.L. Ruan, P. Gao, X.G. Yang and T.X. Yu, Toughening high performance ultrahigh molecular weight polyethylene using multiwalled carbon nanotubes, Polymer44(19), 5643-5654, 2003.

  •  S.L. Ren, S.R. Yang, Y.P. Zhao, T.X. Yu and X.D. Xiao, Preparation and characterization of an ultrahydrophonic surface based on a stearic acid self-assembled monolayer over polythyleneimine thin films, Surface Science546, 64-74, 2003.

  •  H.H. Ruan and T.X. Yu, Local deformation models in analyzing beam-on-beam collisions, Int. J. Mech. Sci. 45(3), 397-423, 2003.

  •  Y.P. Zhao, L.S. Wang and T.X. Yu, Mechanics of adhesion in MEMS – A review, Journal of Adhesion Science and Technology17(4), 519-546, 2003.

  •  D. Ruan, G. Lu, B. Wang and T.X. Yu, In-plane dynamic crushing of honeycombs -- A finite element study, Int. J. Impact Engng. 28(2), 161-182, 2003.

  •  X.D. Huang, G. Lu and T.X. Yu, On the axial splitting and curling of circular metal tubes, Int. J. Mech. Sci. 44, 2369-2391, 2002.

  •  P. Xue, T.X. Yu and E. Chu, An energy approach for predicting springback of metal sheets after double-curvature forming, Part I: Axisymmetric stamping, Int. J. Mech. Sci. 43(8), 1893-1914, 2001.

  •  T.X. Yu, J.L. Yang and S.R. Reid, Deformable body impact: Dynamic plastic behaviour of a moving free-free beam striking the tip of a cantilever beam, Int. J. Solids Struct. 38(2), 261-287, 2001.

  •  T.X. Yu and F.L. Chen, Failure of plastic structures under intense dynamic loading: Modes, criteria and thresholds, Int. J. Mech. Sci. 42(8), 1537-1554, 2000.

  •  T.X. Yu, X.M. Tao and P. Xue, Energy-absorbing capacity of grid-domed textile composites, Composites Science and Technology60(5), 785-800, 2000.

  •  S.R. Reid, T.X. Yu and J.L. Yang, An elastic-plastic hardening-softening cantilever beam subjected to a force pulse at its tip: a model for pipe whip, Proc. R. Soc. Lond. A 454, 997-1029, 1998.

  •  T.X. Yu, J.L. Yang and S.R. Reid, Interaction between reflected elastic flexural waves and a plastic "hinge" in the dynamic response of pulse loaded beams, Int. J. Impact Engng. 19(5-6), 457-475, 1997.

  •  L. Zhu and T.X. Yu, Saturated impulse for pulse-loaded elastic-plastic square plates, Int. J. Solids Struct. 34(14), 1709-1718, 1997.

  •  J.K. Kim and T.X. Yu, Forming and failure behaviour of coated, laminated and sandwiched sheet metals: a review, Journal of Materials Processing Technology63(1-3), 33-42, 1997.

  •  T.X. Yu, J.L. Yang, S.R. Reid and C.D. Austin, Dynamic behaviour of elastic-plastic free-free beam subjected to impulsive loading, Int. J. Solids Struct. 33(18), 2659-2680, 1996.

  •  余同希,软化梁的动力行为,力学学报,第27卷,第2期,161-172页,1995年。

  •  X.Y. Su, T.X. Yu and S.R. Reid, Inertia-sensitive impact energy-absorbing structures, Part I: Effects of inertia and elasticity, Int. J. Impact Engng. 16(4), 651-672, 1995.

  •  Y.P. Zhao, T.X. Yu and J. Fang, Large dynamic plastic deflection of a simply supported beam subjected to rectangular pressure pulse, Archive of Applied Mechanics64(3), 223-232, 1994.

  •  T.X. Yu, S.R. Reid and B. Wang, Hardening-softening behaviour of tubular cantilever beams, Int. J. Mech. Sci. 35(12), 1021-1033, 1993.

  •  T.X. Yu and F.L. Chen, The large deflection dynamic response of rectangular plates, Int. J. Impact Engng. 12(4), 603-616, 1992.

  •  J.L. Yang, T.X. Yu and G.Y. Jiang, Dynamic response of rigid-plastic simply-supported imperfect beam subjected to a uniform intense dynamic loading, Int. J. Impact Engng. 11(2), 211-223, 1991.

  •  X.D. Wang and T.X. Yu, Parkes revisited: effect of elastic deformation at the root of a cantilever beam, Int. J. Impact Engng. 11(2), 197-209, 1991.

  •  余同希、陈发良,用‘膜力因子法’分析简支刚塑性圆板的大挠度动力响应,力学学报,第22卷,第5期,555-565页,1990年。

  •  T.X. Yu and W.J. Stronge, Large deflection of a rigid-plastic beam-on-foundation from impact, Int. J. Impact Engng. 9(1), 115-126, 1990.

  •  L.C. Zhang, T.X. Yu and R. Wang, Investigation of sheet metal forming by bending -- Part II: Plastic wrinkling of circular sheets pressed by cylindrical punches, Int. J. Mech. Sci. 31(4), 301-308, 1989.

  •  L.C. Zhang, T.X. Yu and R. Wang, Investigation of sheet metal forming by bending -- Part I: Axisymmetric elastic-plastic bending of circular sheets pressed by cylindrical punches, Int. J. Mech. Sci. 31(4), 285-300, 1989.

  • T.G. Zhang and T.X. Yu, A note on a "velocity sensitive" energy-absorbing structure, Int. J. Impact Engng. 8(1), 43-51, 1989.

  •  Y.L. Hua, T.X. Yu and S.R. Reid, Double-hinge modes in the dynamic response of plastic cantilever beams, Int. J. Impact Engng. 7(4), 401-413, 1988.

  • Y. Xu, L.C. Zhang and T.X. Yu, The elastic-plastic pure bending and springback of L-shaped beams, Int. J. Mech. Sci. 29(6), 425-433, 1987.

  •  伍小强、余同希,悬臂梁弹塑性大挠度的全过程分析,力学学报,第18卷,第6期, 516-527页,1986年。

  • P.S. Symonds and T.X. Yu, Counterintuitive behaviour in a problem of elastic-plastic beam dynamics, ASME J. Appl. Mech. 52(3), 517-522, 1985.

  •  T.X. Yu and W.J. Stronge, Wrinkling of a circular elastic plate stamped by a spherical punch, Int. J. Solids Struct. 21(10), 995-1003, 1985.

  •  T.X. Yu , W. Johnson and W.J. Stronge, Stamping and springback of circular plates deformed in hemispherical dies, Int. J. Mech. Sci. 26(2), 131-148, 1984.

  • T.X. Yu and W. Johnson, Cylindrical bending of metal strips, Metals Technology10, 439-448, 1983.

  •  T.X. Yu and W. Johnson, The Plastica: the large elastic-plastic deflection of a strut, Int. J. Non-Linear Mech. 17(3), 195-209, 1982.

  •  T.X. Yu and W. Johnson, The buckling of annular plates in relation to the deep drawing process, Int. J. Mech. Sci. 24(3), 175-188, 1982.

  • T.X. Yu and W. Johnson, Influence of axial force on the elastic-plastic bending and springback of a beam, J. Mechanical Working Technology6(1), 5-21, 1982.